50 Watt Single Output DC-DC Converter

Features

  • 2:1 input range
  • High reliability circuitry
  • Wide working temperature range
  • Built in EMI filter, low output ripple and noise
  • Short circuit protection
  • Overload and over voltage protection
  • 100% full load burn in test
  • ISO-9001 certified manufacturer

Specifications

Input voltage See table below
Output voltage adjustment (5V: 4.5~5.5V), (12V: 11~16V), (24V: 23~30V)
Line regulation ± 0.5% Maximum
Load Regulation ± 0.5% Maximum
Overload protection 105% ~ 150% output pulsing mode
Over voltage protection 115% ~ 165% of output voltage
Withstand voltage, (1 minute) Input to output: 1.5Kv. Input to frame ground: 1.5 Kv.
Working Temperature -10C~+60C
Isolation resistance 500VDC, 100MW
Connection method Barrier terminal strip, 9.5mm spacing
Size 159D x 97W x 38H mm
Weight 0.5 Kgs
Packing 30 pieces equal 1.0 Cu Ft.

Models

Type

Input

Output

Ripple and Noise

Efficiency

SD-50A-5

9.2~18 volts

5 volts – 10 amps

< 100mV P – P

70%

SD-50A-12

9.2~18 volts

12 volts – 4.2 amps

< 120mV P -P

72%

SD-50A-24

9.2~18 volts

24 volts – 2.1 amps

< 150mV P - P

74%

SD-50B-5

19~36 volts

5 volts – 10 amps

< 100mV P – P

73%

SD-50B-12

19~36 volts

12 volts – 4.2 amps

< 120mV P – P

75%

SD-50B-24

19~36 volts

24 volts – 2.1 amps

< 150mV P – P

80%

SD-50C-5

36~72 volts

5 volts – 10 amps

< 100mV P – P

76%

SD-50C-12

36~72 Volts

12 volts – 4.2 amps

< 120mV P – P

78%

SD-50C-24

36~72 volts

24 volts – 2.1 amps

< 150mV P -P

83%

Click for cabinet layout drawing Case #901

I   Return to Home Page   I   Return to OEM Main Page   I   AC to DC Enclosed Cabinet Models    I
I  
AC to DC Printed Circuit Board Modules   I   DC to DC Power Converters   I

DuraComm is a registered trademark of DuraComm Corporation
Copyright © 1999  DuraComm Corporation    All Rights Reserved