RU1-BMS_Front_Web
RU1-BMS_Rear_Web

RU1-2012-BMS

Product Description

The Model RU1-2012-BMS is a complete power supply and battery management system. Smart Charging and battery protecting Low Voltage Disconnect maintain and prevent battery failures caused by over-charging and excessively deep discharging. Dual Schottky diodes provide smooth transfer to battery power and auto-revert to AC mains power that is seamless and glitch less. The Smart Charger is designed to auto-charge and maintains Gelled electrolyte (Gel-Cell) and liquid electrolyte lead-acid 12 volt batteries up to 120 Amp Hour. The charger is a constant monitoring charger for the charging and maintenance of fixed location UPS, emergency lighting systems, and telecommunications battery backup systems.

The charger is protected against over loading by deep discharge smart circuitry with auto shut down due to over-voltage, over-temperature, short circuit and reverse polarity.

Switch mode circuit design provides high efficiency, compact size, cool operation and high reliability. Dual color red/green LED provides a visual indication of charger status. The bicolor LED will show the following conditions:

  • Red light: charging process
  • Bi-color flash: in the transition period between charging and full charge
  • Green light: battery is fully charged and the charger is in float mode
  • Green light flashing: poor connection from charger to battery (check connections)

Green LED on left hand side of front panel shows output power.

The Model RU1-2012 BMS incorporates an automatic Low Voltage Disconnect that monitors battery voltage and disconnects the load when the battery voltage drops below 11.5 VDC. The LVD has been adjusted and calibrated at the factory for correct voltage disconnects and re-connect. No adjustment is required.

After the AC main power is restored and the battery is recharging, the LVD will reconnect the load when the battery voltage exceeds 12.5 volts

Product Specifications

Output Current (Amps):
20
Output Voltage VDC:
13.8
Input Voltage VAC:
110 or 220
Disconnect / Reconnect VDC:
11.5 /12.5
Suggested Battery Capacity:
60-120 Ah
Meters:
NO
Panel Height:
1.75"
Weight (lbs):
8.5
Dimensions:
1.75"H x 19"W x 10.5"D

Downloadable PDFs

© DuraComm Power Supplies. All rights reserved. | 6655 Troost Ave. • Kansas City, MO 64131
Site Created by KC Web Specialists, LLC.
Terms & Conditions  |  Privacy Policy  |  Careers