DIN-LVD-12-30_Web

DIN-LVD-12-30

Category:

Product Description

The DIN-LVD-12-30 is pre-set to disconnect the load at 10.4 VDC. However, to prevent premature or false disconnect when the battery voltage drops below the 10.4 volt threshold, a 2 minute timer is started. If the battery recovers to above 10.4 volts, the timer resets and waits. The battery can and will recover if the system is a repeater or remote base station or similar equipment that has a varying demand that fluctuates from low to high current. The 2 minute delay ensures the battery is not disconnected until necessary to prevent damage.

After the AC main power is restored and the battery is recharging, the DIN- LVD-12-30 will reconnect the load when the battery voltage exceeds 12.5 volts.

NOTE: The individual user should take care to determine, prior to use or installation, whether this device is suitable, adequate or safe for the use intended. Since individual applications are subject to great variation, DuraComm makes no representation or warranty as to the suitability, or fitness of these units for any specific application.

Product Specifications

Input Range VDC:
10-15
Disconnect / Reconnect VDC:
10.4 / 12.5
Amps (Max):
30
Weight (lbs):
1.75
Dimensions:
5"H x 2"W x 5.5"D

Downloadable PDFs

© DuraComm Power Supplies. All rights reserved. | 6655 Troost Ave. • Kansas City, MO 64131
Site Created by KC Web Specialists, LLC.
Terms & Conditions  |  Privacy Policy  |  Careers