Pagers

TP-450A UHF 2 Tone Pager
CLOSEOUTS!
While Supplies Last!

DuraComm’s TP Series pagers are the first two channel pager / monitor receivers
in the industry that can decode different tone groups on both channels.

I ACCESSORIES I SALES TERMS I WARRANTY I

DuraComm’s
TP Series

• 2-CHANNEL OPERATION/MULTI-FORMAT.

• PC PROGRAMMABLE TONES, NO MECHANICAL "REEDS".

• DUAL CALL ADDRESSING AND GROUP CALL ON EACH CHANNEL.

• PROGRAMMABLE MONITOR AND PRIORITY SCANNING FEATURES.

• FACTORY OR FIELD TONE PROGRAMMING--USE PK-1 KIT

• Receiver can be programmed to decode the most popular 2 tone
sequential decode formats independently on each channel.

• Pager can have three (3) separate addresses (the equivalent of 4 tone
reeds) programmed on each channel.

• Unit in monitor mode has scanning capability with user-selectable A
or B priority.

• Versatile unit offers multiple battery configurations. It can operate from 3
common AA size cells. A 700 mah nickel cadmium battery is shipped
with each pager/monitor for in-unit recharging when used with any
DuraComm drop-in charger or amplifier/charger combination.

• Vibrator option is available which can be set by software for a 1 or 7 second duration. If the user is not
present at the time of the page, a flashing LED informs the user of the page.

• Manual and auto reset (up to 1 minute max).

• DuraComm’s pager/monitors deliver nearly a half watt of audio to the speaker. Loud and intelligible
compared to the competition.

• Low battery alert automatically tells the use when operating voltage is below threshold. A visual LED
and audible warning tones are built in features.

Frequency Ranges	450-470 MHz
Frequency Control	Crystal
Frequency Stability	+/-10 PPM, -10C to +50C
Operating Temperature Range	-10C to +50C
Audio Output SPL	(Alert Tone) 95 dB @ 12 inches (Voice) 92 dB @ 12 inches
Modulation Acceptance	+/-7 KHZ
Adjacent Channel Selectivity	60dB
Spurious/Image Rejection	55dB
Paging Sensitivity	8 point average:10 uV/meter Best direction:5uV/meter 12 dB SINAD:12uV/meter 20 dB Quieting:15 uV/meter
Power Sources	3 cell AA size holder (Alkaline or Nicad)
Power Consumption a) Stand By Receive, No Audio b) MaxAudio	4.5V 10 ma 4.5 volts 200 ma
Decoder Formats	Motorola®, GE®, and generic
Dimensions	3.8"H x 2.2"W x 0.8"D or 97H x 56W x 20D mm (not including belt clip or speaker grill)
Weight (including battery)	5.3 oz. 150 grams
Vibrator	optional

Model	Frequency Range	Description	Close-Out Price
TP-450A	UHF 450-470 MHz	2 channel pager with scanning monitor	Was $279.95 NOW $239.95

Model	Factory Options	Close-Out Price
FP-1	Factory Reprogramming Charge (Per unit)	$20.00
* LC-1U	Loose UHF crystals for "TP" series (Allow 4 weeks delivery)	Was $50. NOW $45.00
VM-1	Vibrator & installation (used in "silent mode" operation)	Was $95. NOW $24.95