DuraComm Discontinued Products 2008

BB Series
Power Distribution Blocks

• 3, 6, 9, 12, 15, 18 Fuse units

• Up to 30 amps per fuse

• Uses standard automotive fuses

DCS-N1 Series
Diode Switch for Back-Up Power System

Provides Connection of 2 Power Sources
for “N + 1” Redundancy

             • Usable with 12 / 24 / 48 VDC Systems
             • Double Output Protection with Diode Isolation
             • Automatic Seamless Transfer of Power
             • Heavy Duty Posts Input/Output Connectors
             • Handles 5-75 VDC Up to 50 Amps
           • 19” Rack Mount Battery Back-Up Module

Weight - 7.5 lbs
31/2”H x 19”W x 13”D

DP Series
Power Distribution Panels

           • Economical Method of Distributing Power
           • 75 Amp Maximum Per Panel
           • 30 Amp Maximum Per Position
           • Utilizes Automotive ATO Blade Fuses (Not Supplied)
           • 2 Rack Units (3 ½") Vertical Height
           • 6, 9, 12, 15 and 18 Positions Available for 12 Volt and
           24 Volt Systems
           • Fuses on Negative and Positive Line

DT-2012-BBSC Series
20 Amp Power Supply with Battery Back-Up System & Smart Charger

Weight -10 lbs
2 3/4"H x 6 3/4"W x 141/2”D

• Provides 20 Amps Continuous Power & 7 Amps Battery Charging

• Power Factor Correction (PFC) for Energy Savings

• Heavy Duty Post Output Connectors

• Built-in Smart Charger Maintains External Battery in Peak Condition

• Seamless Transfer to Battery Back-Up When Power Fails

• Combine with LPH Radio Hood for Desk Top Base Station

Model #	Amps (Max)	Input Voltage	Adjustable Output VDC	Sugg. Battery Capacity
DT-2012-BBSC	20	110 or 220 VAC (Factory Set)	12-15	60 Ah to 120 Ah

DTHP-1048 & DTHP-2024
Desk Top High Power AC/DC Power Supplies

Economical Higher Power in 24 / 48 V Desktops

   • Compatible with LPH Radio Hoods to Create Desk Top
     “Base Stations”

   • Input Voltage 110 / 220 VAC (Factory Set)

   • Includes In-Rush Current Limiting

   • Fan Cooling

   • Short Circuit / Over Load / Over Temperature Protections

   • Heavy Duty Post Output Connectors

Weight - 10 lbs
2 3/4”H x 6 3/4”W x 141/2”D

Model Number	Amps (Max)	Input Voltage	Adjustable Output VDC

DTHP-2024	20	110 / 220 AC (Factory Set)	24-29
DTHP-1048	10	110 / 220 AC (Factory Set)	48-56

MMBB / MMBC
Battery Back Up Modules

2.75 lbs
3.5"H x 7"W x 6"D

Combines with DPS Series
Power Supplies to
Provide Solid State
Battery Back Up

• Dual Shottky Diodes provide protective isolation and
seamless transfer to battery when power goes down.
No relays to fail.

• High capacity, will handle up to 75 amps continuous.
• MMBC automatically provides float charge, battery maintenance when power is restored.
• MMBB provides Dual Diode isolation but without battery charging.
• Input voltage range up to 60 VDC allows operation in 12, 24, or 48 VDC systems. (Initial power supply voltage should be set to
13.8V for 12V systems, 27.5V for 24V systems and 55.2V for 48V systems to compensate for voltage drop through the diodes.)

RMBB
Battery Back Up Modules

• Dual Schottky Diodes provide protective isolation and seamless transfer to battery when power goes down. No relays to fail.
• Handles up to 75 amps continuous.
• Easy mounting on the back of 13.8, 27.5 and 48 volt RM power supplies.
• RMBC automatically provides float charge, battery maintenance when power is restored.
• RMBB provides dual diode isolation but without battery charging.
• Includes mounting hardware and wiring.
• Factory installation available if ordered with RM power supply, (please specify).

Combines with RM Series Power Supplies to
Provide Solid State Battery Back Up Operation

Weight - 1.75 lbs
3 1/2”H x 9”W x 3”D

BATTERY RMBC ON RM 5012 LOAD

RUR Series
Rack Mount Power Supplies

Weight - 6.5 lbs
3 1/2”H x 19”W x 6”D

1,000 Watt, 2 Rack Unit High Power Supplies

• Input Voltage 90~132 / 180~264 VAC
• High Power Density (Big Performance / Small Size)
• Remote Sense / On-Off Control (DC O.K. Signal)
• Active Surge Current Limiting
(Inrush Current 35A / 115 VAC & 55A / 230 VAC)
• Short Circuit / Over Load / Over Voltage / Over Temperature
Protections

Model Number	Amps (Max)	Input Voltage	Adjustable Output VDC

RUR-1000-15	80	90-264 VAC / 254-370 VDC	13-16
RUR-1000-24	40	90-264 VAC / 254-370 VDC	22-27.5
RUR-1000-48	20	90-264 VAC / 254-370 VDC	43-56

SE Series
Rack Mount Power Supplies

1,000 Watt High Power Density Modules

       • Input Voltage 90~132 / 180~264 VAC
       • Remote Sense / On-Off Control (DC O.K. Signal)
       • Short Circuit / Overload / Over Voltage /
       Over Temperature Protections
       • Active Surge Current Limiting
       (Inrush Current 35A / 115 VAC & 55A / 230 VAC
       • Big Power / Small Package

UL Recognized

Weight - 5.5 lbs
21/2”H x 5”W x 10.9”D

Model Number

SE-1000-15

SE-1000-24

SE-1000-48

Amps Max

Input Voltage

90-264 VAC; 254-370 VDC

90-264 VAC; 254-370 VDC

90-264 VAC; 254-370 VDC

Adjustable Output VDC

13-16

22-27.5

43-56

DuraComm Corporation
203 W. 23rd Ave.
North Kansas City, MO 64116
1 (800) 467-6741
Fax: 1 (800) 825-1403